Paar Engineering
Comet is hand-made from Hard Maple, the neck as well as the fretboard is made from hard maple.
This guitar has a fit and finish of all Paar Engineering models - finish is multiple thin coats of lacquer, which protects the wood but still allows the "feel" of wood grain under your fingers. The Wilkinson double-coil pickups provide a warm but bright and slightly scooped midrange perfect for your favorite music genre. The action has been set low, keen attention is paid to the neck joint and pocket during the build, ensuring with the lowest practical action. The frets have been manually dressed to ensure there will be no cuts nor scratches as you run your hand down the fretboard chasing scales.
Controls are 1 volume and 1 tone with a 3-way switch. Wiring used is 22 gauge which provides plenty of conductivity for signals to wind through the controls and to the output jack.
A Gator brand rectangular electric guitar case (model GWE-ELEC) is available for purchase for $80.00 flat rate with no additional shipping charge. During checkout, this option will be available.
As a promotion for this guitar and for Paar Engineering, shipping on this guitar is FREE (to the continental United States of America only).
Specifications | |
Body | |
| Body shape | Double cutaway |
| Body material: | Solid wood |
| Body wood: | Maple |
| Body finish: | Gloss Urethane 6 coats |
| Orientation: | Right handed |
Electronics | |
| Pickups Configuration: | HH |
| Neck: | Wilkinson WOCHB Hot Ceramic Classic Humbucker, Chrome |
| Bridge: | Wilkinson WOCHB Hot Ceramic Classic Humbucker, Chrome |
| Active or passive pickups: | Passive |
| Wiring: | Series |
| Control layout: | Volume 1, tone 1 |
| Pickup switch: | 3-way |
Neck | |
| Neck shape: | Slim Taper |
| Neck wood: | Maple |
| Neck Joint: | Bolt-on |
| Scale length: | 25.50" |
| Truss rod: | Standard |
| Neck finish: | None |
| Fingerboard: | Maple |
| Radius: | 12" |
| Fret size: | Standard |
| Number of frets: | 22 |
| Inlays: | Circular |
| Nut width/material: | 1.69" (43 mm) Hard plastic |
Hardware | |
| Bridge type: | Fixed, Heavy, Non-Tremelo, Hardtail |
| Tuning machines: | Gotoh |
| Bridge, Tuners Color: | Chrome |
Other | |
| Gig bag: | Included |
Izar is made from African Mahogany, Satinwood and Bloodwood. The neck and fretboard are made from hard maple.
This guitar has a fit and finish of all Paar Engineering models - finish is multiple thin coats of lacquer, which protects the wood but still allows the "feel" of wood grain under your fingers. The Seymour Duncan Invader double-coil pickups provide an extra heavy signal to rock your socks off!
Seymour Duncan Invader (bridge and neck)
The action has been set low, keen attention is paid to the neck joint and pocket during the build, ensuring with the lowest practical action. The frets have been manually dressed to ensure there will be no cuts nor scratches as you run your hand down the fretboard chasing scales.
Controls are 1 volume and 1 tone with a 3-way switch. Wiring used is 22 gauge which provides plenty of conductivity for signals to wind through the controls and to the output jack.
A Gator brand rectangular electric guitar case (model GWE-ELEC) is available for purchase for $80.00 flat rate with no additional shipping charge. During checkout, this option will be available.
As a promotion for this guitar and for Paar Engineering, shipping on this guitar is FREE (to the continental United States of America only).
Specifications | |
Body | |
| Body shape" | Double cutaway |
| Body material" | Solid wood |
| Body wood" | African Mahogany, Satinwood and Bloodwood |
| Body finish" | Lacquer 6 coats |
| Orientation" | Right handed |
Electronics | |
| Pickups Configuration" | HH |
| Bridge" | Seymour Duncan Invader |
| Neck" | Seymour Duncan Invader |
| Active or passive pickups" | Passive |
| Control layout" | Volume 1, tone 1 |
| Pickup switch" | 3-way |
Neck | |
| Neck shape" | Slim Taper |
| Neck wood" | Maple |
| Neck Joint" | Bolt-on |
| Scale length" | 25.50" |
| Truss rod" | Standard |
| Neck finish" | None |
| Fingerboard" | Maple |
| Radius" | 12" |
| Fret size" | Standard |
| Number of frets" | 22 |
| Inlays" | Circular |
| Nut width/material 1.69" (43 mm) Hard plastic | |
Hardware | |
| Bridge type" | Fixed, Heavy, Non-Tremelo, Hardtail, Body-through |
| Tuning machines" | Wilkinson |
| Bridge, Tuners Color" | Chrome |
Nimbus is hand—made from African Mahogany, the neck as well as the fretboard is made from hard maple.
This guitar has a fit and finish of all Paar Engineering models - finish is multiple thin coats of lacquer, which protects the wood but still allows the "feel" of wood grain under your fingers. The Wilkinson double-coil pickups provide a warm but bright and slightly scooped midrange. The action has been set low, keen attention is paid to the neck joint and pocket during the build, ensuring with the lowest practical action. The frets have been manually dressed to ensure there will be no cuts nor scratches as you run your hand down the fretboard chasing scales.
Controls are 1 volume and 1 tone with a 3-way switch. Wiring used is 22 gauge which provides plenty of conductivity.
A Gator brand rectangular electric guitar case (model GWE-ELEC) is available for purchase for $80.00 flat rate with no additional shipping charge. During checkout, this option will be available.
Specifications | |
Body | |
| Body shape | Double cutaway |
| Body material: | Solid wood |
| Body wood: | African Mahogany |
| Body finish: | Semi-gloss Urethane 6 coats |
| Orientation: | Right handed |
Electronics | |
| Pickups Configuration: | HH |
| Bridge: | Wilkinson WOCHB Hot Ceramic Classic Humbucker, Chrome |
| Neck: | Wilkinson WOCHB Hot Ceramic Classic Humbucker, Chrome |
| Active or passive pickups: | Passive |
| Wiring: | Series |
| Control layout: | Volume 1, tone 1 |
| Pickup switch: | 3-way |
Neck | |
| Neck shape: | Slim Taper |
| Neck wood: | Maple |
| Neck Joint: | Bolt-on |
| Scale length: | 25.50" |
| Truss rod: | Standard |
| Neck finish: | None |
| Fingerboard: | Maple |
| Radius: | 12" |
| Fret size: | Standard |
| Number of frets: | 22 |
| Inlays: | Circular |
| Nut width/material: | 1.69" (43 mm) Hard plastic |
Hardware | |
| Bridge type: | Fixed, Heavy, Non-Tremelo, Hardtail |
| Tuning machines: | Gotoh |
| Bridge, Tuners Color: | Chrome |
An ATAZUA Douglas brand Baritone rectangular electric guitar case (model EGC-200 EXP) is available for purchase for $115.00 flat rate with no additional shipping charge. During checkout, this option will be available.
As a promotion for this guitar and for Paar Engineering, shipping on this guitar is FREE (to the continental United States of America only).
SpecificationsSpecifications | |
Body | |
| Body shape | Single cutaway |
| Body material: | Solid wood |
| Body wood: | Black Walnut |
| Body finish: | Lacquer coats |
| Orientation: | Right handed |
Electronics | |
| Pickups Configuration: | HH |
| Bridge: | Seymour Duncan JB Model |
| Neck: | Seymour Duncan Jazz Model |
| Active or passive pickups: | Passive |
| Wiring: | Series |
| Control layout: | Volume 1, tone 1 |
| Pickup switch: | 3-way |
Neck | |
| Neck shape: | C Taper |
| Neck wood: | Maple |
| Neck Joint: | Bolt-on |
| Scale length: | 25.50" |
| Truss rod: | Standard |
| Neck finish: | None |
| Fingerboard: | Highly Figured Spalted Maple |
| Radius: | 12" |
| Fret size: | Standard |
| Number of frets: | 22 |
| Inlays: | Circular, Quilted Aspen |
| Nut width/material: | 1.69" (43 mm) Hard plastic |
Hardware | |
| Bridge type: | Fixed, Heavy, Non-Tremelo, Hardtail |
| Tuning machines: | Gotoh |
| Bridge, Tuners Color: | Chrome |
Sirius is professionally hand-made from Red Oak, a domestic hardwood. The neck is made from hard maple.
This guitar has a fit and finish of all Paar Engineering models - finish is multiple thin coats of lacquer, which protects the wood but still allows the "feel" of wood grain under your fingers. The Seymour Duncan Hot Rodded double-coil pickups provide a clear, clean signal to amplify.
The action has been set low, keen attention is paid to the neck joint and pocket during the build, ensuring with the lowest practical action. The frets have been manually dressed to ensure there will be no cuts nor scratches as you run your hand down the fretboard chasing scales.
Controls are 1 volume and 1 tone with a 3-way switch. Wiring used is 22 gauge which provides plenty of conductivity for signals to wind through the controls and to the output jack.
A Gator brand rectangular electric guitar case (model GWE-ELEC) is available for purchase for $80.00 flat rate with no additional shipping charge. During checkout, this option will be available.
As a promotion for this guitar and for Paar Engineering, shipping on this guitar is FREE (to the continental United States of America only).
Specifications | |
Body | |
| Body shape" | Double cutaway |
| Body wood" | Red Oak |
| Body finish" | Semi-gloss Urethane 6 coats |
| Orientation" | Right handed |
Electronics | |
| Pickups Configuration: | HH |
| Neck: | Wilkinson WOCHB Hot Ceramic Classic Humbucker, Chrome |
| Bridge: | Wilkinson WOCHB Hot Ceramic Classic Humbucker, Chrome |
| Active or passive pickups: | Passive |
| Control layout: | Volume 1, tone 1 |
| Pickup switch: | 3-way |
Neck | |
| Neck shape: | Slim Taper |
| Neck wood: | Hardwood |
| Neck Joint: | Bolt-on |
| Scale length: | 25.50" |
| Truss rod: | Standard |
| Neck finish: | None |
| Fingerboard: | Maple |
| Radius: | 12" |
| Fret size: | Standard |
| Number of frets: | 22 |
| Inlays: | Circular |
| Nut width/material 1.69" (43 mm) Hard plastic | |
Hardware | |
| Bridge type: | Fixed, Heavy, Non-Tremelo, Hardtail, Body-through |
| Tuning machines: | Wilkinson |
| Bridge, Tuners Color: | Chrome |
Sirius is professionally hand-made from Spalted Pecan, a rare hardwood to find and one that has finished beautifully using lacquer, showing the spalting action in the wood to a very nice degree. The neck as well as the fretboard is made from hard maple.
This guitar has a fit and finish of all Paar Engineering models - finish is multiple thin coats of polyurethane, which protects the wood but still allows the "feel" of wood grain under your fingers. The Seymour Duncan Hot Rodded double-coil pickups provide a clear, clean signal to amplify. The action has been set low, keen attention is paid to the neck joint and pocket during the build, ensuring with the lowest practical action. The frets have been manually dressed to ensure there will be no cuts nor scratches as you run your hand down the fretboard chasing scales.
Controls are 1 volume and 1 tone with a 3-way switch. Wiring used is 22 gauge which provides plenty of conductivity for signals to wind through the controls and to the output jack.
A Gator brand rectangular electric guitar case (model GWE-ELEC) is available for purchase for $80.00 flat rate with no additional shipping charge. During checkout, this option will be available.
As a promotion for this guitar and for Paar Engineering, shipping on this guitar is FREE (to the continental United States of America only).
Specifications | |
Body | |
| Body shape" | Double cutaway |
| Body material" | Solid wood |
| Body wood" | Spalted Pecan |
| Body finish" | Semi-gloss Urethane 6 coats |
| Orientation" | Right handed |
Electronics | |
| Pickups Configuration" | HH |
| Bridge" | Wilkinson WOCHB Hot Ceramic Classic Humbucker, Chrome |
| Neck" | Wilkinson WOCHB Hot Ceramic Classic Humbucker, Chrome |
| Active or passive pickups" | Passive |
| Control layout" | Volume 1, tone 1 |
| Pickup switch" | 3-way |
Neck | |
| Neck shape" | Slim Taper |
| Neck wood" | Maple |
| Neck Joint" | Bolt-on |
| Scale length" | 25.50" |
| Truss rod" | Standard |
| Neck finish" | None |
| Fingerboard" | Maple |
| Radius" | 12" |
| Fret size" | Standard |
| Number of frets" | 22 |
| Inlays" | Circular |
| Nut width/material 1.69" (43 mm) Hard plastic | |
Hardware | |
| Bridge type" | Fixed, Heavy, Non-Tremelo, Hardtail, Body-through |
| Tuning machines" | Wilkinson |
| Bridge, Tuners Color" | Chrome |
Titan is professionally made hand-made from African Mahogany heartwood. The neck as well as the fretboard is made from hard maple with rectangular insets. The headstock is "reversed", making for an interesting tuning experience and really cool look!
This guitar has a fit and finish of all Paar Engineering models - finish is multiple thin coats of lacquer. The GFS Alnico pickups provide hot and heavy sound perfect for rock. The action has been set low, keen attention is paid to the neck joint and pocket during the build, ensuring with the lowest practical action. The frets have been manually dressed to ensure there will be no cuts nor scratches as you run your hand down the fretboard chasing scales.
Controls are 2 volumes and 1 tone with a 3-way switch. Wiring used is 22 gauge which provides plenty of conductivity.
Titan does not fit in a standard V-shaped case nor does it fit in a standard rectangular case. To acquire a hardshell case, a bass guitar case would need to be purchased separately from another vendor. The critical measurements of this guitar are 46 3/4" length and 18" width at the base, widest end. A hardshell case is not included in this listing; however, a Gator gig bag, model GBEEXTREME1, can be purchased along with this guitar.
As a promotion for this guitar and for Paar Engineering, shipping on this guitar is FREE (to the continental United States of America only).
Specifications | |
Body | |
| Body shape | V |
| Body material: | Solid wood |
| Body wood: | African Mahogany |
| Body finish: | Spray lacquer |
| Orientation: | Right handed |
| Weight: 7.84 pounds | |
| Total Length: 46.75 inches | |
| Width at widest wing point: 18 inches | |
Electronics | |
| Pickups Configuration: | HH |
| Bridge: | GFS Alnico "Fat Pat" bridge |
| Neck: | GFS Alnico "Fat Pat" neck |
| Active or passive pickups: | Passive |
| Wiring: | Series |
| Control layout: | Volume 2, tone 1 |
| Pickup switch: | 3-way |
Neck | |
| Neck shape: | Slim Taper |
| Neck wood: | Maple |
| Neck Joint: | Bolt-on |
| Scale length: | 25.50" |
| Truss rod: | Standard |
| Neck finish: | None |
| Fingerboard: | Maple |
| Fretboard Radius: | 12" |
| Fret size: | Standard |
| Number of frets: | 22 |
| Inlays: | Rectangular |
| Nut width/material | 1.69" (43 mm) Plastic |
Hardware | |
| Bridge type: | Fixed, Heavy, Non-Tremelo, Hardtail |
| Tuning machines: | Wilkinson |
| Bridge, Tuners Color: | Chrome |
- 1